By Salime, founder of Moonlit Marble
Quick answer: Clean marble with a soft cloth, warm water and a few drops of mild, pH-neutral soap, then dry it. Never use vinegar, lemon, bleach or bathroom sprays — acids dissolve the surface and leave dull marks called etches. Wipe spills quickly and re-seal marble and travertine every 6–12 months to keep stains out.
Natural stone is far easier to live with than most people expect. It only asks for two things: the right cleaner and a little speed when something spills. Here is the routine we recommend for every marble, travertine and onyx piece we make.
How do you clean marble every day?
- Dampen a soft cloth or sponge with warm water.
- For anything sticky, add one or two drops of mild dish soap. It should be gentle and free of citrus or vinegar.
- Wipe the piece, then rinse the cloth and wipe again with plain water to remove soap residue.
- Dry with a clean towel. Drying prevents water spots and mineral rings.
That is all most pieces ever need. A marble vase or sculpture on a shelf may only need a dry dusting cloth once a week.
What should you never use on marble?
- Vinegar and lemon juice — popular "natural" cleaners, but both are acids.
- Bathroom and kitchen sprays — many contain acids or bleach. Check the label.
- Bleach and ammonia — they can dull the finish over time.
- Abrasive powders, scouring pads and steel wool — they scratch the polish.
- The dishwasher — heat, detergent and knocks are too much for stone.
What is the difference between an etch and a stain?
An etch is a dull, slightly rough spot where an acid has eaten into the surface. It looks lighter than the stone around it. Wine, coffee, citrus, tomato and soda are the usual causes.
A stain is a darker mark where a liquid has soaked into the stone — oil, coffee or ink, for example. Sealing is what stops liquids from soaking in.
Marble, travertine and onyx are all made mostly of calcite, which is why all three react to acids in the same way.
How do you remove a stain from marble?
For a light stain, a simple poultice often helps:
- Mix baking soda with a little water into a thick paste.
- Spread it over the stain, cover with plastic wrap and leave it for 24 hours.
- Remove the paste, rinse with water and dry.
The paste slowly draws the stain out of the stone. Repeat once if needed. Test on a hidden spot first, such as the base. For a deep stain or an etch on a large surface, a stone restoration professional is the safest option.
How often should marble be sealed?
We recommend sealing marble and travertine every 6–12 months with a food-safe natural-stone sealer. Pieces that are handled or washed often, like kitchen and bathroom pieces, are at the shorter end of that range.
The water test: put a few drops of water on the surface and wait 10 minutes. If the water still beads up, the seal is working. If the stone darkens where the water was, it is time to re-seal.
Caring for marble in each room
- Kitchen: wipe spice jars, mortars and paper towel holders after cooking. Oil and citrus are the main risks.
- Bathroom: rinse soap residue from bathroom sets once a week and keep acidic shower cleaners away from the stone.
- Dining table: line fruit bowls if you keep cut or very ripe fruit in them.
- Candles: let wax harden, then lift it gently with a plastic card. Never scrape with metal.
Frequently asked questions
Can I use dish soap on marble?
Yes, a small amount of mild dish soap is fine. Avoid soaps with citrus, vinegar or "degreasing acid" on the label, and always rinse and dry afterwards.
Can marble get wet?
Yes. Water does not harm marble, but standing water can leave mineral rings, so wipe it dry rather than letting it sit.
Is natural variation a sign of damage?
No. Veins, color changes and, in travertine, small natural pits are part of the stone. They are not flaws.
Does onyx need different care?
Onyx follows the same rules as marble, with a little extra gentleness: it is softer and more delicate, so handle it with care and use only a soft cloth.
For the short version to keep on hand, see our Care Guide. Every Moonlit Marble piece is hand-finished in Türkiye, made to order and shipped free to the United States, the United Kingdom, Canada and Switzerland.